This is a one time announcement so as not to clog the board:
All of the patterns, on a cd being released, can be seen at:
http://BullRunArt.com/patterns1.html Just use the "Next"
and "Previous" arrows to go through 13 pages of thumbnails.
The 300 patterns will be on a single cd if all goes well. if it
takes two to fit them all then so be it. There are crisp and clear
lines. Varying levels of difficulty, and virtually ANY theme you can
think of.
If ya bought em all for $7 a pop (average catalog price), then
you'd pay $2000+ ! It's a gift from me to you. Whether or not you
see my patterns as a gift, is up to you ; )
Me making patterns AND cd's has been a learning experience.
Some people have the capability to resize patterns as needed, but, I
will personally go through and resize each pattern to make sure
it's "actual size" is 8 x 10 or as close as proportion let's it get.
If for some reason a pattern or patterns are too small or big, let me
know and I'll remedy the problem.
Any patterns made after today's date (April 15, 2004) will not
be on the cd, therefore, being the usual $7 price tag per pattern.
Of course you are still welcome to buy individual patterns at $7
until/unless I come up with a more specified price list. I had
started that list when my health began to roller coaster...haven't
finished it yet. If bought by itself, the Harley-Eagle-Logo pattern
is the only $10 so far. It WILL be one of the patterns on the cd of
300. Can be purchased by paypal at
http://BullRunArt.com/patterns1.html or by snail mail to:
Charles Dearing
P.O. Box 1212
Elgin, Tx 78621
No pressure, just wanted to let ya'll know 'cause I'm a pattern
junkie and I know there are others! This is a one time mention of
this cd in the group so any questions you have about it, just email
me at Charlie "at" BullRunArt.com
Ya'll make dust now......ya hear?
Charlie
Hello everyone!
It's been a long time since I've been here. I've just received a
request from a club in Sudbury looking for donations to auction off
at a fundraising event. I will be donating a couple of bird and
wildlife pieces, and thought I'd find out if anyone here may be
interested in doing the same. If you are interested, email me, and
I'll pass along the club's resume, fundraising letter, and contact
info.
Thanx in advance, and Happy Scrolling!
Shelley - London, ON
www.woodworkzone.com
www.homestead.com/youngcraft
For some unknown reason to me my identity got mixed up in Yahoo
sites and it would no longer accept my name , password etc... etc.
Notices said my identity belonged to someone else. DUH.. It belonged
to me for years.
Nevertheless I got around it by deleting all Yahoo data from my
computer and re -registered with different identification.
I am now accepted and I am in the process of re- registering into
the various Yahoo sites that interest me.
It's been a long time since I was active in this one. This site
dosn't look all that active right now. Maybe it's just in one of
those slumps that some go though ?
Bill Young
http://www.picturetrail.com/willyswoodcrafting
Sorry Dave. I haven't had time to scroll in too long. I been busy
with other things. I still drop in from time to time though. I just
got a request from a freind of my daughters to do a picture though
so I may be getting some time in on the saw shortly. How is everyone
else. I seems that very few even posted to this thread. I know that
folks are at least popping in and reading new posts. Please post
something. Makes the owners happy, right Dave
Steve Blandford
--- In ontarioscrollers@..., "Dave Sutton"
<suttonspace@r...> wrote:
> Are there any other scrollers who drop in here, other than me??
This
> use to be such an active club, and lately, there seems to be very
> little participation in the group. It sure would be nice to come
in
> here, and see that some folks are still interested in this group.
> Please let me know.
> Hoping the FUN METER is still on HIGH!!
> Dave (dustycanuck)
There have been a couple of times when I logged into the chat on
Sunday and no one is here. Have you moved the chat to a different
night? If so, what night and time. Thanks
I have finally finshed drawing up a set of plans for an Air
Filtration System that utilizes a Furnace Squirrel Cage, a Furnace
Motor and 6 each 1" x 16" x 20" Furnace Filters. It works very well
for me and it just might work just as well for many of you out
there. Ther are a few out there that I had promised these plans to
when I had completed them, but, due to a malfunction at the
junction, my compter hard drive decided that it was time to give up
the ghost. It had two viruses' and a worm on it, pluss 330 deep
rooted Spyware thingi\y's and I had also had a hacker get in. I
think that I have all of that rectified with the upgrading of my
firewall, this years Norton and a few other devices that will work
together. Plus a whole new hard drive with twice the capacity that I
had with the original.
I tried to attach the plans to this message, but for some reason,
I just could not so, if those that want a copy, they can email me
direct or via this group and I will send them out to you
Yours
Gunner (Lorne)
Cold Lake
Alta
Dave -- I was just able to get in just fine. I have been lurking around,
might want to make sure he signs out of Yahoo and then signs back in. If
that doesn't help, I would delete any yahoo cookies as I believe that is how
they tell where you can go (memberships in groups, etc). Hope this helps.
Tim
-----Original Message-----
From: Dave Sutton [mailto:suttonspace@...]
Sent: Friday, February 06, 2004 5:37 PM
To: ontarioscrollers@...
Subject: [ONTARIO SCROLLERS] Problems accessing "Member" areas
Good day, eh, Folks!!
I have been informed by tbear (Ted D in Elliot Lake, Ontario) that
there are problems accessing "Member" areas of the group.
Ted can't seem to get past the Home Page, although he has been a
member in the group for quite a while.
I don't know how to help him with this, and I'm interested in hearing
from anyone (by posting to this message board) who might be able to
get Ted back in.
If others are having problems like this, please e-mail me at
dustycanuck@... and let's work together in solving this
dilemma.
Trying to keep the FUN METER on HIGH!!
Dave (dustycanuck)
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://ca.groups.yahoo.com/group/ontarioscrollers/
b.. To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Good day, eh, Folks!!
I have been informed by tbear (Ted D in Elliot Lake, Ontario) that
there are problems accessing "Member" areas of the group.
Ted can't seem to get past the Home Page, although he has been a
member in the group for quite a while.
I don't know how to help him with this, and I'm interested in hearing
from anyone (by posting to this message board) who might be able to
get Ted back in.
If others are having problems like this, please e-mail me at
dustycanuck@... and let's work together in solving this
dilemma.
Trying to keep the FUN METER on HIGH!!
Dave (dustycanuck)
don't know why but I never get to see any pictures of finished patterns to see
what they look like can you help me out.
Dave Sutton <suttonspace@...> wrote:Good day, eh, Folks!!
The new Home Page photo is of my latest pattern
design/cutting...WINTER WOLF.
Comments and critiques always appreciated, and thanks in advance.
Helping to keep the FUN METER on HIGH!!
Dave (dustycanuck)
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Post your free ad now! Yahoo! Canada Personals
[Non-text portions of this message have been removed]
--- In ontarioscrollers@..., warren59 <no_reply@y...>
wrote:
> Posted of picture of Dave Sutton's (Dusty) Alpha Couple.
> Its 1/2" red oak, cut with a 2/0 spiral blade and finished with
blo
> and two coats of Deft semigloss spray lacquer.
> Warren
Nice cutting Warren,Dave will give you a thumbs up for that job.
Keep up the first rate scrolling. Popsb94558
Posted of picture of Dave Sutton's (Dusty) Alpha Couple.
Its 1/2" red oak, cut with a 2/0 spiral blade and finished with blo
and two coats of Deft semigloss spray lacquer.
Warren
Well spotted Tom. It is indead from "Fine Line Design" by Judy Gale Roberts,
Design Book #1. In the book it is on page 28, one of the 111" by 17" fold out
pages.
It wasn't the easiest pattern I've done and am quite proud of how it turned out.
I have it mounted with a black acrylic sheet behind the wood, 1/8" balsam ply.
Thanks for the comments,
Garry Robertson
Surrey, BC
p.s. I was born and raised in Ontario, so I guess it's OK for a west coaster to
be a member of Ontario Scrollers.
Tom Sevy <sevy99@...> wrote:
I haven't yet checked out the Zebra referred to, but I think the Judy Gale
Roberts pattern for a fret sawn Zebra is the best I've ever seen. It's in
one of her Fine Line pattern books.
Tom Sevy in Salt Lake
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Post your free ad now! Yahoo! Canada Personals
[Non-text portions of this message have been removed]
I haven't yet checked out the Zebra referred to, but I think the Judy Gale
Roberts pattern for a fret sawn Zebra is the best I've ever seen. It's in
one of her Fine Line pattern books.
Tom Sevy in Salt Lake
Good day, eh, Folks!!
The new Home Page photo is of my latest pattern
design/cutting...WINTER WOLF.
Comments and critiques always appreciated, and thanks in advance.
Helping to keep the FUN METER on HIGH!!
Dave (dustycanuck)
Dave:
I would love to post what I have cut but unforntuately, I have sold all of
what I have done. This is the bad season right now as I still work and most of
my free time is spent working with thr Royal Canadian Legion. I am working on a
clock but is very slow going as there was a page (2 actually) in the plans that
were missing. I purchased the plans fron Scrollersplans, sent them am email and
got no response what so ever. Sent an email to the Berry Basket and they very
promptly sent me what I was asking for.
Sorry about the Clipper but there is another one on its way. For us, we
are looking at -34 and maybe even colder. Up on the Cold Lake Air Weapons Range,
where I work in the Cold Lake Oil Patch, the temperatures will drop down to
about -44. Just shy of Bermuda Short weather.
Once the middle of Feb. rolls around, the activities at the outr local
Branch of the Legion along with District and Provincial Command start to slow
way down and I will be able to get out to my shop and get some work done and
then will post some pictures, especially now that I got a Digital Camera for
Christmas.
Keep warm.
Lorne
Cold Lake
Alberta
Home of Kinosoo (Big Fish)
----- Original Message -----
From: Dave Sutton
To: ontarioscrollers@...
Sent: Thursday, January 22, 2004 9:56 AM
Subject: Re: [ONTARIO SCROLLERS] Where Did Everyone Go????
--- In ontarioscrollers@..., "Lorne Pultz" <lhprcaf@t...>
wrote:
> Dave:
> Although I joined this group some six or eight months ago, I
have not participated in many posts but have just "Lurked" sort of
getting used to what everyone works on as a speciality thing so to
speak.
> Like you, I have noticed that the traffic has slowed down
tremendously. at we sent down that way last week as them too chilled
to do any scrolling or posting.
> Lorne
> Cold Lake
> Alberta.
> The Colder Province.
Good day, eh, Lorne!!
Sure wish you folks out there would stop sending those "Alberta
Clippers" our way!! LOL!!
Thanks for your post...I hope you'll give up your lurking habits, and
become a regular on this board.
I'd really like to see anything that you've cut, so don't be bashful,
and open an album for us to see...we're all just cutters, and enjoy
seeing what others are doing. If you have any scrolling questions,
please feel free to post them here...someone's bound to get back to
you with an answer.
Looking forward to more from you!!
Dave (dustycanuck)
>
> ----- Original Message -----
> From: Dave Sutton
> To: ontarioscrollers@...
> Sent: Wednesday, January 21, 2004 8:10 PM
> Subject: [ONTARIO SCROLLERS] Where Did Everyone Go????
>
>
> Are there any other scrollers who drop in here, other than
me?? This
> use to be such an active club, and lately, there seems to be
very
> little participation in the group. It sure would be nice to
come in
> here, and see that some folks are still interested in this
group.
> Please let me know.
> Hoping the FUN METER is still on HIGH!!
> Dave (dustycanuck)
>
>
>
> To unsubscribe from this group, send an email to:
> ontarioscrollers-unsubscribe@...
>
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
>
> [Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
$230.00--$255.00 and this one I'll try for $275.00-$280.00 To make this piece
takes about 4 half days of cutting. Can't sit on this one a full day.
----- Original Message -----
From: Dave Sutton
To: ontarioscrollers@...
Sent: Thursday, January 22, 2004 9:03 AM
Subject: [ONTARIO SCROLLERS] Re: New Cutting Posted
--- In ontarioscrollers@..., "popsb94558" <barrelart@p...>
wrote:
> Thank's Dave for a super pattern, This is the third cutting of this
> pattern in the last 8 weeks. I raise the price $25 each time and it
> still is one of the best eye catchers at the art or craft shows I
> attend.Still have a few patterns of yours that I haven't had the
> time to cut yet. Thanks again. Hank
Hi Hank!!
Curious as to what your current price is on that cutting. Folks
interested in seeing the fantastic cuttings of Hanks can view his
album in this site..."popsb94558".
You are one of the few who actually post pics of the finished cut of
my patterns, although there are many who have them...Thanks...If
folks keep cutting them, I'll keep designing them.
Wait until you see what's next!!
Keeping the FUN METER on HIGH!!
Dave (dustycanuck)
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
--- In ontarioscrollers@..., "popsb94558" <barrelart@p...>
wrote:
> Thank's Dave for a super pattern, This is the third cutting of this
> pattern in the last 8 weeks. I raise the price $25 each time and it
> still is one of the best eye catchers at the art or craft shows I
> attend.Still have a few patterns of yours that I haven't had the
> time to cut yet. Thanks again. Hank
Hi Hank!!
Curious as to what your current price is on that cutting. Folks
interested in seeing the fantastic cuttings of Hanks can view his
album in this site..."popsb94558".
You are one of the few who actually post pics of the finished cut of
my patterns, although there are many who have them...Thanks...If
folks keep cutting them, I'll keep designing them.
Wait until you see what's next!!
Keeping the FUN METER on HIGH!!
Dave (dustycanuck)
--- In ontarioscrollers@..., "Lorne Pultz" <lhprcaf@t...>
wrote:
> Dave:
> Although I joined this group some six or eight months ago, I
have not participated in many posts but have just "Lurked" sort of
getting used to what everyone works on as a speciality thing so to
speak.
> Like you, I have noticed that the traffic has slowed down
tremendously. at we sent down that way last week as them too chilled
to do any scrolling or posting.
> Lorne
> Cold Lake
> Alberta.
> The Colder Province.
Good day, eh, Lorne!!
Sure wish you folks out there would stop sending those "Alberta
Clippers" our way!! LOL!!
Thanks for your post...I hope you'll give up your lurking habits, and
become a regular on this board.
I'd really like to see anything that you've cut, so don't be bashful,
and open an album for us to see...we're all just cutters, and enjoy
seeing what others are doing. If you have any scrolling questions,
please feel free to post them here...someone's bound to get back to
you with an answer.
Looking forward to more from you!!
Dave (dustycanuck)
>
> ----- Original Message -----
> From: Dave Sutton
> To: ontarioscrollers@...
> Sent: Wednesday, January 21, 2004 8:10 PM
> Subject: [ONTARIO SCROLLERS] Where Did Everyone Go????
>
>
> Are there any other scrollers who drop in here, other than
me?? This
> use to be such an active club, and lately, there seems to be
very
> little participation in the group. It sure would be nice to
come in
> here, and see that some folks are still interested in this
group.
> Please let me know.
> Hoping the FUN METER is still on HIGH!!
> Dave (dustycanuck)
>
>
>
> To unsubscribe from this group, send an email to:
> ontarioscrollers-unsubscribe@...
>
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
>
> [Non-text portions of this message have been removed]
Thank's Dave for a super pattern, This is the third cutting of this
pattern in the last 8 weeks. I raise the price $25 each time and it
still is one of the best eye catchers at the art or craft shows I
attend.Still have a few patterns of yours that I haven't had the
time to cut yet. Thanks again. Hank
Hi Dave, I hit the site at least 4-5 times a week and never see any new posts.
Sure would like to see some chatter about how other scrollers use the saw. Maybe
this will get some folks out of the snow banks up there. Thanks for my cutting
on the main page. Regards, Hank
----- Original Message -----
From: Dave Sutton
To: ontarioscrollers@...
Sent: Wednesday, January 21, 2004 7:10 PM
Subject: [ONTARIO SCROLLERS] Where Did Everyone Go????
Are there any other scrollers who drop in here, other than me?? This
use to be such an active club, and lately, there seems to be very
little participation in the group. It sure would be nice to come in
here, and see that some folks are still interested in this group.
Please let me know.
Hoping the FUN METER is still on HIGH!!
Dave (dustycanuck)
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Dave:
Although I joined this group some six or eight months ago, I have not
participated in many posts but have just "Lurked" sort of getting used to what
everyone works on as a speciality thing so to speak.
Like you, I have noticed that the traffic has slowed down tremendously. at
we sent down that way last week as them too chilled to do any scrolling or
posting.
Lorne
Cold Lake
Alberta.
The Colder Province.
----- Original Message -----
From: Dave Sutton
To: ontarioscrollers@...
Sent: Wednesday, January 21, 2004 8:10 PM
Subject: [ONTARIO SCROLLERS] Where Did Everyone Go????
Are there any other scrollers who drop in here, other than me?? This
use to be such an active club, and lately, there seems to be very
little participation in the group. It sure would be nice to come in
here, and see that some folks are still interested in this group.
Please let me know.
Hoping the FUN METER is still on HIGH!!
Dave (dustycanuck)
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Are there any other scrollers who drop in here, other than me?? This
use to be such an active club, and lately, there seems to be very
little participation in the group. It sure would be nice to come in
here, and see that some folks are still interested in this group.
Please let me know.
Hoping the FUN METER is still on HIGH!!
Dave (dustycanuck)
On this occasion, We wish you a Merry Christmas, and a very healthy, successful
and happy New Year, full of God's grace, love and protection, to you and your
entire family.
Bethlehem Olive Wood Web site: http://www.bethlehemolivewood.net
Bethlehem Bible Artists: http://www.bibleartists.com
Church Web site: http://www.nativitychurch.com
Touch of Bethlehem web site http://www.touchofbethlehem.com
----- Original Message -----
From: Dave Sutton
To: ontarioscrollers@...
Sent: Wednesday, December 24, 2003 1:12 AM
Subject: [ONTARIO SCROLLERS] MERRY CHRISTMAS!!
To all the members of this group...Here's wishing you and yours the
Merriest of Christmases, and the very best of the Holiday Season.
Keep the saw-dust piling up, and you won't even notice the snow, and
cold weather!!
All the best
Dave (dustycanuck)
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
.Same to you Mr Sutton, and to all the members
----- Original Message -----
From: Sherry Senicar
To: ontarioscrollers@...
Sent: Tuesday, December 23, 2003 3:20 PM
Subject: RE: [ONTARIO SCROLLERS] MERRY CHRISTMAS!!
Same to you and your family Dave
Sherry
-----Original Message-----
From: Dave Sutton [mailto:suttonspace@...]
Sent: Tuesday, December 23, 2003 6:12 PM
To: ontarioscrollers@...
Subject: [ONTARIO SCROLLERS] MERRY CHRISTMAS!!
To all the members of this group...Here's wishing you and yours the
Merriest of Christmases, and the very best of the Holiday Season.
Keep the saw-dust piling up, and you won't even notice the snow, and
cold weather!!
All the best
Dave (dustycanuck)
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Same to you and your family Dave
Sherry
-----Original Message-----
From: Dave Sutton [mailto:suttonspace@...]
Sent: Tuesday, December 23, 2003 6:12 PM
To: ontarioscrollers@...
Subject: [ONTARIO SCROLLERS] MERRY CHRISTMAS!!
To all the members of this group...Here's wishing you and yours the
Merriest of Christmases, and the very best of the Holiday Season.
Keep the saw-dust piling up, and you won't even notice the snow, and
cold weather!!
All the best
Dave (dustycanuck)
To unsubscribe from this group, send an email to:
ontarioscrollers-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
To all the members of this group...Here's wishing you and yours the
Merriest of Christmases, and the very best of the Holiday Season.
Keep the saw-dust piling up, and you won't even notice the snow, and
cold weather!!
All the best
Dave (dustycanuck)
I would like to thank the Mods. for selecting my JUNGLE QUEEN
cutting as the home page photo, my work would not have been possible
if we scrollers diden't have the talent of Dusty Canuck Dave and
other fine artists to do all the time consuming work to make the
patterns. THANK YOU. As for the cutting, I have the good fortune of
living near a mill that cuts only black walnut. This cutting is
13"X17"X 1 38" thick, Flying Dutchman POLOR blades #3#5#7 with a
felt backing. This was a nice cut, alot of drill holes but well
worth the time it took to cut. Would like to see some other cuttings
of this fine pattern. Thanks again, Hank
Our newest home page photo is courtesy of Hank---aka popsb95548. I'm
sure Hank will be happy to tell us a little bit more about what wood
and blades he used to create this masterful cutting.
Congrats, Hank---well done!!
Dave (dustycanuck)
Online Now 
Send Email
Offline 